STR-MF1200X-M is a CE certified andTUV(UL61010) or CSA Ready compact muffle furnace that offers12"x12"x12"high purity fibrous alumina chamber, gas inlet and outlet ports and a 30 programmable segments temperature controller and UL / MET / CSA Certified electric components. It is the ideal muffle furnace for preparing samples with the temperatures up to 1100°Cin research and dental labs with maximum energy saving.

SPECIFICATIONS

Structure	1、High purity fibrous alumina insulation for maximum energy saving. 2、Heating elements on all three sides of the interior chamber for fast heating and enhanced temperature uniformity. 3、Double layer steel structure with air cooling fan tokeep furnace's exteriors safe to touch. 4、Safety interlock will automatically power off the furnace when the door is opened. 5、Built-in vent port (top) to remove undesirable contaminants and moisture and extend the lifespan of the heating elements and furnace.
Chamber Dimensions	1、Size: 12"x12"x12" ( 304x304x304 mm) 2、Capacity: 27 liters (1728 cubic-inches) 3、Observation window of quartz ( 1/2" - 2" diameter ) is available upon request
Power	1、7.5 KW Max. at 10°C/min to 1200 °C 2、40 A Breaker (installed) 3、Note： Power cable included, choose a plug according to your country or your lab requirement
Voltage	208~240V AC, Single phase, 50/60 Hz
Max Operating Temperature	1200 ℃continuously
Temperature Stability	±1 °C
Temperature Uniformity	1、+/- 5 ℃over 120 mm 1100°C 2、+/- 2 ℃over 80 mm 1100 °C
Max. Heating Rate	10 °C/min
Temperature Controller	1、FA-YD518P-AGtemperature controller is included. 2、Proportional–integral–derivative control (PID control) and auto-tune function 3、30 segments programmed with ramping, cooling and dwelling steps 4、Built-in over-temperature alarm and thermocouple failure alarm 5、+/- 1 ºC temperature control accuracy 6、Default DB9 PC communication port 、MET Certified
Temperature controller (optional)	1、Temperature control software kit (for YD518P series controllers) + 15" laptop package is available at the options bar. 2、You may upgrade the temperature controller to the Eurotherm Temperature Controllerwhich is fully compatible with LabVIEW. This package includes a Eurotherm programmer, a communication cable (RS485 - USB) and a software CD. Click the pic below to view the full spec of Eurotherm temperature controller.
Laptop, software amp; WiFi Control(Optional)	1、Brand new laptop with Microsoft Window 10 and Microsoft Office 2013 (30 days free trial) for immediate use. 2、 Temperature Control System (EQ-MTS01)enables the user to edit temperature profile, manage heat-treatment recipe, record and plot data for STR-furnaces. 3、A wireless remote control provides up to 300 meters operating range. 3、Above features are available upon request at an extra cost. Please contact us for more information. 4、Note: The software is only compatible with Yudian Temperature Controller
Gas Fitting amp; Exhaust	1、One 1/4" barbed Gas Inlet installed on the back panel of the furnace. 2、One gas exhaust port is built on the top of the furnace casing.
Product Dimensions	24"x34"x24" (DxHxW)
Shipping Dimensions	48"x40"x50" (DxWxH)
Shipping Weight	320 lb
Warranty	1、One year limited warranty with lifetime support. 2、ATTENTION: Any damages caused by the use of corrosive and acidic gasses are not under the coverage of STR-One Year Limited Warranty.
Compliance	1、CE Certified 、NRTLor CSA certification is available upon request at extra cost.
Application Notes	1、For longer furnace service life, we recommend the heating rate not to exceed 10 ℃/min. 2、The cooling rate shall also not exceed 10 ℃/min. 3、This furnace lacksvacuum sealing, and it is not recommended to use toxic or explosive gasses in this furnace without necessary safety controls and supervision. 4、Small cracks may appear on the surface of the refractory ceramics over extended use. This is a normal occurrence and the cracks may be repaired withalumina coating. 5、You may order alumina crucible by click picture below. click here to choose a crucible
Operation Instructions

import(/layout/smh/menuRight.html);import(/layout/smh/menubottom.html);