产品详情

Specification

Furnace Structure	Double-layer stainless steel structure for maximum safetyThe bottom loading mechanism by electric hydraulic lift ， which can hold 200 Kg Max. sampleWater cooling front door and sealing jacket for max. service life.Touch-screen digital control panel for all parameters.Precision temperature control with +/- 3 ºC uniformity inside the chamber and +/-0.5℃accuracy.
Inside Chamber Size	Heated chamber: 500x500x500 mm ( ~ 20"x25"x25" . 125 Liter capacity )Energy-saving 1800 grade fibrous alumina insulation.High purity Al2O3 coating.
Power	AC 220V， three-phase; 50/60 Hz40 KW 50Amp （ 80Aair-breaker）
Heating Element	12 Pcs SiC heating element
Continuous Working Temperature	1300°C
Maximum Working Temperature	1400°C (＜ 1 hr)
Heating Rate	5℃/ min
Temperature Accuracy	+/- 0.5 ºC
Thermocouple	Two S type thermocouples (control thermocouple and secondary alarm thermocouple)
Temperature Control	Eurotherm controller with PID automatic control via SCR(Silicon Controlled Rectifier) 30 programmable segments for precise control of heating/cooling rate and dwell time.Over-temperature protection andthermocouple failure alarm functions allow operation without attendant(s).+/- 0.5 ºC temperature accuracy.RS485 Communications Port
Gas Flow Control and Vacuum Valve	One flow meters ( 0~12L/min) is installed on the front panel of the furnace.One heavy-duty vacuum pump (CE certified) is built on the bottom of the furnace. is
Net Weight	3000 Kg
Dimensions
Warranty	One year limited warranty with lifetime support. (Consumable parts such as sample plates and heating elements are not covered by the warranty, please order the replacement at related products below.)
Compliance	CE Certified for the furnace, vacuum pump, and water chiller.NRTLor CSA certification is available at extra cost.（ please click mark below to learn details
Application Notes	For longer service life, we recommend the heating rate not to exceed 5 ℃/min.The cooling rate shall also not exceed 5 ℃/min. Small cracks may appear on the surface of the refractory ceramics over extended use. This is a normal occurrence and the cracks may be repaired with alumina coating.The refractory block must be inserted before closing door.Attention: A two-stage pressure regulator must be installed on the gas cylinder to limit the pressure to below 3 PSI for safe operation.Click here to learnthe installation of a gas regulator.
Warnings	ATTENTION: Any damages caused by the use of corrosive and acidic gasses are not under the coverage of STR-One Year Limited Warranty.In order to prevent oxidation/corrosion damages to the Mo heating elements, it is necessary to keep a constant inert gas (Ar preferred) flow throughout the entire process. This is the most effective way to carry out any by-products.
Operation Instructions

import(/layout/smh/menubottom.html);
TAG:
上一篇:1500℃Max. Muffle Furnace with 10x10x12＂ Chamber _Double Doors _Slide RailsSMG MF1500X-DD
下一篇:1700℃BottomLoading Vertical Furnace(13L) with Dual StagesVTF-1600X-Z