产品详情

Please view "Isotropic round-wire multifilament cuprate superconductor for generation of magnetic fields above 30 TMat-2014-13-4-Larbalestier-Isotropic round-wire" published by NATURE MATERIAL 3887, 9 MARCH 2014, in which an STR-High-Pressure furnace was used.

OTF-1200X-HP-VIII-80-GF is a high-pressure tube furnace with eight heating zones and pressure control system. The processing tube is made of Ni-based superalloy (50 mm IDx2000mm L) which can withstand high pressure (oxygen or inert gases) under 1100°Cmax. Its pressure control system can maintain a stable pressure during the heating process which is critical for processing Fe-based superconductive material, or new generation oxide ceramics.

SPECIFICATIONS

Furnace amp; Power	、Splittable Eight heating zone tube furnace with air cooling layer 、High-quality fibrous insulation and reflective coating for max. energy saving. 、Power: 208 - 240VAC 50/60Hz, Single Phase, 9.6KW max. (circuit breaker which is rated 60amps or higher is recommended)
Heating Zone	、Eight heating zones: 150mm / zone 、Total heating zone length: 1200mm 、Constant temp. zone: 900mm ±5°C
Working Temperature	、1100℃max.for ＜ 1hr 、1000℃for continuous 、Heating rate: ≤10°C/min
Temperature Control	、Touch screen temperature controller is built in a control station which provides inpidual controls over the eight heating zones 、Each channel is with PID auto-tuning, up to 30 segments programmable 、Built-in overheating amp; thermocouple failure protection. 、+/- 1 ºC temperature accuracy.
Thermocouple	•Omega 3mm OD K Typewith high-temperature (220°C) connector 、Total 8 TCs, one for each zone
Process Vessel	、The pressure vessel is made of Nickel-based superalloy GH747 (Click to download GH747 nickel-based alloy datasheet) 、Vessel size: OD 85xID 50xLength 2000 (mm) 、Optional: torque wrench is available hereto avoid over-tighten the flange bolts. Please click the image on the left to order. 、Warning: Never put a sample inside tube directly without crucible or isolated foil to avoid sample react with tube alloy.
Working Pressure	、20 Mpa max. at ＜800°C 、13 Mpa max. at ＜900°C 、6 Mpa max. at ＜1000°C 、4 Mpa max. at ＜1100°C 、Never heat up above 1200°C
Working Gases	、Inert gas and oxygen 、No hydrogen or any flammable gas
Flange and Fitting	、Two CF type flanges are weld with female 1/4"NPT fitting to connect high-pressure tube 、2 pcs Copper o-rings are included ( spare copper O-ring is available as consumable )
Gas Flow amp; Pressure Control System	、Gas flow and pressure control system is built ina heavy-duty mobile tableunder the furnace and safety frame 、Two pressure sensors and digital displays are installed to monitor the pressure for gas inlet and furnace tube 、One high-pressure mass flow controller is installed at the gas outlet to control gas flow rate with max. 10Mpa working pressure and 500 SCCM flow rate 、Pressure relief valves are installed to ensure safety. The valve will release gas when the pressure reaches the setting point.
Dimension amp; Weight	、Dimension: 26000mmL*700mmW*947mmH(furnace); 1100mmL*600W*1200mmH (control consol) 、Net weight: 480 kg
Operation Instruction
Compliance and Warranty	•All electric components ( gt;24V) are UL or MET listed, and ready to pass TUV, UL or CSA certificate on feild at extra cost ( click mark to learn what is ) 、One year limited warranty for lifetime support
Application Notes	•Hytort Application, or named Hydroretorting of Shale Oilis a process developed by IGT to double the yield of shale oil and hydrocarbon gases. STR-High-Pressure furnaces with Ni-based superalloy tube is an ideal tool for conducting related experiments. Please click underlined to view research paper.
Safety Notes	、Ni-based Superalloy ( Waspaloy or equivalent) is a reliable processing tube which can be used under high temperature and high pressure.. It has excellent ductility and tensile property so only creep deformation happens under overpressure destruction test and following by a crack formed (usually at the hot zone at the center of tube) to release the pressure. Brittle fracture won’t happen in the overpressure destruction test which means no tube explosion will happen under an overpressure of inert gas or safe gas or under other accidents causing overpressure . Above pics show Ni-based Super-alloy ( Waspaloy or equivalent) processing tube under overpressure test 、Attention: For the use with flammable, toxic or corrosive gases, you must contact STR- engineering group for the consultation to know all the prerequisites and precautionary measures. 、Attention: A two-stage pressure regulator must be installed on the gas cylinder to limit the pressure to below 3 PSI for safe operation. Please click here to learn how to install the gas regulator.

import(/layout/smh/menubottom.html);
生产厂家哪家好？1100℃Eight Zone High Pressure Super-Alloy Tube Furnace with Gas Flow _Pressure Control SystemOTF-1200X-VIII-80-GF-洛阳赛特瑞高温实验炉为专业的生产厂家，具有多年的研发与生产经验、质量稳定可靠 TAG: