产品详情

RC-Ni is reactor made of Ni-Base Superalloy, which has excellent creep strength and anti-oxidation. It can reach 1100℃with a pressureup to 4Mpa under oxygen or inert gas. Itis an ideal tool for preparing advanced material by the hydrothermal method, especially heat treat sample under high oxygen pressure. A solenoid valve is installed on the flange allowsauto-pressure reliefcontrol. Temp. Control and Pressure Real-time Monitoring software are also included. (new feature since 5/12/14) SPECIFICATIONS

Structure	、Warning: For your safety, the high-pressure vessel and furnace must be placed inside an explosive- proof box or case during using under high pressure. Never face on top flange without protection to avoid the accident. 、Please click picture and drawing below left to see detail structure, and click pic right to order an Explosion-Proof Box
Working Voltage	、AC 208~240V, Single Phase， 2 KW,
Pressure Vessel	、Made of Ni-Based Superalloy, optional at 65amp;100ml ( click pic 1 to order spare ) 、Air cold flange via aluminum heat radiator 、Liner inside vessel with various materials is available upon request at extra cost 、Attention: Processing Tube is consumable part, you can click picture below to order replacement or spare one It is user resposibility to choose suitable liner to grow different material 、A small quartz or Alumina boat should be used to load the sample inside the vessel. Please click the link below to order separately. Never place the sample directly onto the vessel without a crucible. Vessel service-life could be reduced significantly if you do so. 、You may use gold or nickel foil to wrap the crucible boat to minimize the contamination to the pressure vessel.
Product Dimension
Reactor Capacity amp; Dimensions( Pls select the volumn in the option bar )	、55 mm ODx20 mm IDx214 mm height, 65 mL capacity 、65mm ODx25mm IDx210 mm height, 100 mL capacity
Working Temperature amp; Control	、RT - 1100 ℃Max. 、Digital temperaturecontrollerwith 30 segment programmable 、Temperature accuracy +/- 1°C 、Recommend heating rate ＜=10°C/min
Thermocouple	、Omega 3mm OD K Typewith high-temperature tolerance (220°C) connector
Working Pressure	65ml Version Pressure Range Temperature Range 100ml Version Pressure Range Temperature Range ≦21 Mpa ≦800°C ≦20 Mpa ≦800°C ≦12.5 Mpa ≦900°C ≦12 Mpa ≦900°C ≦6.3Mpa ≦1000°C ≦6 Mpa ≦1000°C ≦4.2Mpa ≦1100°C ≦4 Mpa ≦1100°C
Pressure Sensor	Precision high-pressure sensor (measurement Range up to 250 bars) installed on the pressure vessel.
Pressure Relief Solenoid Valve	、A default 15Mpa max. pressure relief solenoid valve is installed. When the pressure reaches the alarm set point (Max.15Mpa), the pressure inside the vessel will be released via the solenoid valve installed on the flange. For Max.pressure gt;15 Mpa, please shut off the manual needle valve nearby the solenoid valve.)
PC Control (optional)	、A MTS-02 control softwareis available for controlling and displaying temperature and pressure by PC 、PC control module is compatible with Labview software. 、Pressure amp; Temp. Real Time Monitoring (This new feature is available since 5/12/14):
Accessories	、SS316 needle valve with 1/4 pipe connector amp; Pressure gauge included 、TwoCopper Gasket 48mm O.Dare included, which is consumables 、Pls click picture to order spare 、The optional torque wrench is available here to avoid overtightening the flange bolts.Please email us to learn the suitable tightening torque for the Hydrothermal Reactor.
Operation Instructions
Warranty	One year limited warranty. Consumable parts such as copper gaskets, pressure vessels (if over-pressurized, over-heated or chemical interactions), and heating elements (if over heated) are not covered by the warranty.
Application Notes	、Attention: A two-stage pressure regulator must be installed on the gas cylinder to limit the pressure to below 3 PSI for safe operation.Click here to learnthe installation of a gas regulator. 、Do not over tightening the flange screws as this may cause permanent damages to the flange or screws. Please refer tothe instructionsabout proper torque for installing CF flange bolts.We recommend you use a torque wrench to tighten the screws with the flange.
Shipping Dimensions	40"x32" x30"
Shipping Weight	150 lbs

炉管内最大气压	加热温度
≦20Mpa	≦800°C
≦12Mpa	≦900°C
≦6Mpa	≦1000°C
≦4Mpa	≦1100°C

import(/layout/smh/menubottom.html);
生产厂家哪家好？Super-alloy High Pressure Hydro-thermal Reactor 1100℃, Optional 65ml _100mlTF1100X-RC series-洛阳赛特瑞高温实验炉为专业的生产厂家，具有多年的研发与生产经验、质量稳定可靠 TAG: