Vacuum Rapid Heated Pressing Furnace upto 1600ºC _50 Mpa with 0.5" Graphite DieOTF-1700X-RHP4-$system.title}

Vacuum Rapid Heated Pressing Furnace upto 1600ºC _50 Mpa with 0.5" Graphite DieOTF-1700X-RHP4

  • 别称:
  • 类型:高温电炉系列
  • 温度:
  • 规格:

产品详情

Vacuum Rapid Heated Pressing Furnace upto 1600ºC & 50 Mpa with 0.5" Graphite Die - OTF-1700X-RHP4

Reference: Please view "Rapid consolidation of powdered materials by induction hot pressing" published by Review of Scientific Instrument 82, 025104 (2011), who initially provides RHP idea

OTF-1700X-RHP4 is a Vacuum Rapid Heated Pressing Furnace (VRHP or RHP) designed for making dense pallets under vacuum or the protective gas environment. A 15 kW temperature controllable induction heater is integrated into the system, which provides sufficient power for rapidly heating the graphite pressing die up to 1700 ºC. The Induction coil is built inside of stainless steel vacuum chamber. An electric hydraulic press is inserted from the bottom of the chamber, providing up to 5 tons pressing force.

SPECIFICATIONS ( We reserve the right to modify the specifications at any time before order confirmation)

Max. Pressure

、5 metric tons (10 MPa on pressure gauge).

Hydraulic Electrical Presser

、Piston diameter: 60 mm. 、Vertical move distance: 35 mm. 、Automatic pressure controller 、Please click on the picture for details。

Induction Heater

、Working voltage: 208 - 240 VAC, 50/60 Hz, three phase (380V three phase available upon request) 、Working current: 40 A (with a 60 A breaker). 、Maximum input power: 15 kW. 、Output frequency: 30 ~ 80 kHz. 、Duty cycle: 80%. 、Max. Working Temperature : 1600 ℃ max duration time: < 30 min. 、Ultimate Temperature: 1700 ℃ <1 min. (This might cause damage of thermocouple) 、Air cooling: fan. 、Protection: water pressure monitoring, high-temperature protection, and overpower protection.

Temp. Controller

、Working voltage: 208 ~ 240 VAC, single phase. 、Precision digital temperature controller with automatic PID tuning. 、Temperature profile that contains maximum 30 programmable segments to control heating, dwelling, and cooling. 、Overheating and thermocouple failure protection. 、Temperature accuracy: ± 3 ºC. 、B-type thermocouple. 、Continuous working temperature range: 1000 ~1600 ºC. 、lower temperature range (300 - 600oC) is available upoon request. 、Maximum heating rate in vacuum (only for 0.5" inner diameter graphite pressing die; without any thermal block): º 4 ºC/s ( 4 mins 50 seconds from room temperature to 1200 ºC) º 2 ºC/s ( 5min 40 seconds from 1200 to 1300 ºC) º 1.5 ºC/s ( 6min 46 seconds from 1300 to 1400 ºC) º 1.2 ºC/s ( 8mins 10 seconds from 1400 to 1500 ºC) º 1 ºC/s ( 9mins 50 seconds from 1500 to 1600 ºC) 、Experimental cooling ratein vacuum: º 3.5 ºC/s (~ 2 mins 20 seconds from 1600 to 1200 ºC) º 1.1 ºC/s (~ 8mins 10 seconds from 1200 to 800 ºC) º 0.4 ºC/s (~ 21 mins 25 seconds from 800 to 500 ºC) º 0.16 ºC/s (~ 37mins 15 seconds from 500 to 350 ºC) º 0.06 ºC/s (~ 104mins 20 seconds from 350 to 150 ºC)
Processing chamber amp; Sealing Flange 、Stainless steel vacuum sealed chamber: 260× 230 × 320 mm (OD × ID × L). 、Flanges on both ends of the chamber. Flanges have a tunnel for cooling water. 、Equipped with a KF-25D vacuum port, pressure gauge, 1/4" gas inlet port with the stainless steel needle valve. 、The upper flange can be lifted by raising the lead screw which provides the easy access to retrieve the graphite die. 、Requires at least 55 liters per minute water flow. Please click on the picture below to order at an extra cost. 、Vacuum level: up to 10-5Torr by our molecular pumping station(EQ-PAC-LDturbo pumping system pump) or 7.5 mTorr by a mechanical pump. 10-7 torr turbopump system is available upon request 、Vacuum pumped is not included. Please click on the pictures below to view our vacuum pumps at extra cost.
High-Temperature Graphite Pressing Die Set 、Two built-in graphite supporting rods with Max pressure 50 Mpa 、One set of 0.5" (inner diameter) graphite die are included for immediate use. 、Made of high purity graphite by HIP processing, Max. Load from the hydraulic press is dependent on die 's ID º 0.5"ID Max. 0.5T ( sample pressure 50 Mpa ) º 1.0 ID: Max. 3T ( sample pressure 50 Mpa, which is optional) 、The graphite pressing die is fragile and consumable.Please click on the picture below to order extra sets. We also provide customized die sets upon customer request at extra cost. 、Mica spacers are used to adjust the height of die sets and insulate heat. Please click on the picture below to order spares. Note:The maximum pressure range of graphite dies will vary depending on the inner diameter of the die. For example, the graphite dies with an inner diameter of 0.5" can withstand 0.6 metric tons. For the graphite die with an inner diameter of 1" can withstand 3 metric tons. 、If use high-quality SiC dies, the pressure can reach 100 MPa. Please contact your local supplier for SiC die that STR-does not supply
   Dimensions 
•800 × 800 × 1300 mm (L × W × H).

Net Weight

、350 kg.

Shipping Weight amp; Dimensions

Two Pallets935 lbs; 47"x39"x71"420 lbs, 48"x40"x54"

Application Notes

、Attention: the gas cylinder must have a two-stage pressure regulator to limit the pressure below 3 psi for safe operation.Click here to learnthe installation of a gas regulator.
Warranty 、Lifetime support. 、One year limited standard warranty (extend the warranty to 5 years at extra cost). 、Graphite rods are not covered by warranty.
Compliance 、CE certified. 、NRTL certification (UL 1450) is available upon request at extra cost. Please contact our sales representatives for quote.
Operation Manual amp; Video
import(/layout/smh/menubottom.html);
生产厂家哪家好?Vacuum Rapid Heated Pressing Furnace upto 1600ºC _50 Mpa with 0.5" Graphite DieOTF-1700X-RHP4-洛阳赛特瑞高温实验炉为专业的生产厂家,具有多年的研发与生产经验、质量稳定可靠 TAG:

洛阳赛特瑞高温实验炉是高温炉_高温马弗炉_实验电炉_高温电炉_真空气氛炉_热震实验炉_箱式电炉_负极材料预碳化箱式气氛炉_石墨化炉_高温电阻炉_升降电炉_工业电炉等设备和高温电炉配件生产厂家

Copyright © 2020 洛阳赛特瑞高温实验炉 豫备