产品详情

Specification

Induction Heater	Working Voltage: 220V AC, 50/ 60Hz, Three Phases (380VAC, 3phase available upon request)Working Current: 10~86 Amps (100A breaker required)Max. Input Power: 25 KW Output Frequency: 30 - 80 kHz Duty Cycle: 100%Induction Coil: 150mm(OD)x140mm(ID)x65mm(H) Air Cooling: Rear FanProtection: Automatic water pressure, over-temperature, and overpower protectionRefractory Assembling: Complete refractory assembling made of alumina, including bottom crucible support, crucible holder, and cover
Temp. Controller amp; Thermocouple	Precision digital temperature controller with Automatic PID tuning30 segments programmable for controlling heating and cooling rate as well as dwell time.Overheating amp; thermocouple failure protection.+/- 3 ºC temperature accuracy.+/- 3 ºC temperature accuracy.Thermocouple: C type ( 1/4"x10"L ) ( pls click here to order spare as consumable )Continuous Working Temp. Range: 1000ºC~1700ºCMax. Working Temperature: 1800ºC (for less than an hour)Optional： Eurothermo Controller with +/- 0.5 oC accuracy at the extra cost
Graphite Crucible amp; Refractory liners	High Purity Graphite Crucible: 6"O.Dx5" IDx6"H, is included for induction heating.Three-layer special design refractory liner can withstand temperature up to 1800C.Note: Graphite crucible is consumable, please click picture below-right to order spare
Sealing Flangesamp; Quartz Chamber	Two-end Open Quartz Tube is included with dimensions of 11"ODx10.6"IDx 20” H( click picture below-left to order spare or replacement )Top Flange: Stainless steel hinged type flange with 1/4'' thermocouple feedthrough, needle valve, and the barb fitting. Please click the picture (bottom right) to view details.Bottom Flange: Stainless steel flange with a needle valve and KF-25 vacuum port. Please click the picture (bottom-left) to view details.KF25 right angle valveamp; clamps and 1000mm long SS bellows are included for connecting to vacuum pumpBuilt-in 0.3 Bar pressure release valve to protect over-pressure accident.
Pressure Sensor	Anti-Corrosive Capacitance Diaphragm Gauge (Gas Independent), measurement range up to 3.8x10E-5 torrOne 24V,1A DC power adapter is included and ready to use. Input voltage for the adapter is 110~240V Single Phase.
Flow Meter	Compact Direct Read Flow Meter, 100-1000 cc/min. with 1/4NPTis includedAccuracy: 4%Optional: Precision MFC is available upon request at the extra cost
Water Chiller （optional）	Water cooling is requiredTemperature range: 5 - 30°CWater Flow Rate: 58 L/mYou may click pic left to order the recirculating water chiller
Vacuum Pump ( optional )	156 L/min mechanical pump can reach 10e-2 torr vacuum.If you choose high-speed turbo-pump, vacuum level can reach 10- 5 torr ( Hi-Speed turbopump)
Heavy Duty Mobile Cart	Structure: Steel Frame Mobile Cart600mm(L)x800mm(W) surface for placing Induction Heater amp; Quartz Tube with Flange
Protective Sheild	For Non Certified version, a protective shield made of phenolic sheets will be provided.For UL Certified version, a clear protective shield made of polycarbonate will be provided.The protective shield is to be placed around the quartz tube to contain the shooting glass shards if accidents were to happen.
Product Dimensions	Please refer to the picture to the left for overall size info.
Warranty	One year limited warranty with lifetime supportConsumable parts such as processing tube, thermocouple, refractory liners, o-rings and heating coil are not covered by the warranty
Compliance	NRTL Certification is available upon request at extra cost, please contact us for a price quote. Certify standards include: 1) Induction heater: UL61010-1 amp; UL499; 2) Vacuum Pump: UL1450; 3) Water Chiller: UL61010 amp; UL1995
Operation Manual amp; Video
Application NotesClick here to learnmore about the installation of a gas regulator.	Attention: Protective inert gas must be continuously filled throughout the experiment in order to protect the graphite crucible and C thermocouple. The gas flow rate should be limited to ＜ 200 SCCM ( or 200ml/min )The C type thermocouple is consumable which is not covered by manufacturer warranty.Please click hereto learn how to setup crucible for meltingMelting time and temperature are related to materials, the crucible, refractory insulation, etc. If you do not know whether the induction heater can melt your sample or not, please contact our engineer for consulting. The Induction Melting System is designed for use under vacuum and low pressure ＜ 0.02 Mpa.Attention: A two-stage pressure regulator must be installed on the gas cylinder to limit the pressure to below 3 PSI for safe operation.Click here to learnthe installation of a gas regulator.Never heat the furnace while the gas release valve is closed and a positive pressure condition exists within the furnace chamber. The pressure gauge must be used to closely monitor the chamber condition at all times during the heating process; please open the gas release valve immediately once the chamber pressure has reached over 3 PSI to prevent unforeseeable damages.For customization inquiries, please complete the "Customize Induction Heating System Form" and return it to infomtixtl.com
Net Weight	350 lbs
Shipping Weight	TBD
Shipping Dimensions	TBD

import(/layout/smh/menubottom.html);
生产厂家哪家好？25KW Induction Heating System with 11＂ Quartz Tube _Temperature-Controller upto 1700ºCSP-11KTC-洛阳赛特瑞高温实验炉为专业的生产厂家，具有多年的研发与生产经验、质量稳定可靠 TAG: