Two Zones CSS Furnace for Rapid Thermal Processing Upto 3" Dia. _650ºC.OTF-1200X-RTP-II-$system.title}

Two Zones CSS Furnace for Rapid Thermal Processing Upto 3" Dia. _650ºC.OTF-1200X-RTP-II

  • 别称:
  • 类型:高温电炉系列
  • 温度:
  • 规格:

产品详情

Two Zones CSS Furnace for Rapid Thermal Processing Upto 3" Dia. & 650ºC. - OTF-1200X-RTP-II

Please view "Thin-film Sb2Se3 photovoltaics with oriented one-dimensional ribbons and benign grain boundaries" published by NATURE Photonics, May 18, 2015, in which an STR-tube furnace was used for Thin-film Sb2Se3 photovoltaics Rapid Thermal Evaporation processing.OTF-1200X-RTP-II is a twoheating zone rapid thermal processing furnace with 11" O.D quartz tube. It is designed for PVD or CSS (Close Spaced Sublimation) film coating up to 3" diameter or 2"x2" square.The furnace is heated by two group of halogen heaters (Top and Bottom) separately with max. 20ºC/s heating rate. Two 30 segment precision temperature controllers are built in with +/-1ºC accuracy. RS485 port and control software are included to allow for the operation of furnace and temperature profile logging via PC. It is excellent tool to research new generation thin film for solar cells, such as CdTe, Sulfide, and Perovskitesolar cell SPECIFICATIONS:
Furnace structure amp; Vacuum Chamber 、Dual Heater, two temperature controllers, two-channel gas flowmeters are integrated into a mobile aluminum alloy frame 、The chamber is made of high purity fused quartz tube 、Quartz tube size: 11" OD/10.8" IDx9" H 、Carbon fiber felt as thermal insulation 、The vacuum flanges are made of Stainless Steel 316 、Overall dimension:850(L)×745(W)×1615(H) mm
Vacuum Flanges 、Top Flange with one KFD-25 vacuum port and two gas outlets (1/4" pipe required) can slide up or down manually to load and unload substrate and evaporated material easily 、Bottom flange has one KFD-25 vacuum port with two gas inlets (1/4" pipe required) and needle valves 、Flange is sealed by double silicone o-rings and can achieve maximum vacuum pressure of 10E-2 Torr by a quality mechanical pump and 10E-5 Torr by a molecular pump (vacuum pump is not included, please order separately) 、Precision anti-corrosion digital vacuum gauge is in standard package(Since 2016.03.24).
Gas Flow MetersTwo float-meters are installed on the control panel with measurement range of: 、16 -160 mL/m 、400 - 4000 mL/m (for purging purpose)
Heater and Sample Holder 、Two shortwave IR lamps as heating elements for fast heating. 、The distance between two heaters is adjustable from 10 - 50 mm 、The heaters are made of stainless steel with water cold jacket to reduce heat radiation and allow for fast cooling 、3" round wafer holderis built in with top heater to load substrate 、One high thermal conductive AlN plate (3"Diax0.5mm Thick) is included, which shall put on the back of substrate to make it heated uniformly 、One 3" graphite plate can be used alternatively for AIN plate, please click the picture below to order. 、Halogen Light Heater replacement is available at extra cost, pleaseclick hereto order.
Temperature Controller 、Two precision digital temperature controllers with 30 segments programmable offer independent controlling of top and bottom heaters 、Each controller has PID auto-tune function to protect heaters from overshooting and alarm function to avoid overheating and thermal couple broken 、PC communication interface amp; software is installed for (click picture below for details) recording temperature profile shown as below
Working Temperature 、Maximum temperature for each heater: <= 650ºC 、Maximum temperature difference between two heaters: <= 300ºC depends on the spacing between two heaters: º Spacing 30mm Max. temp difference: 315ºC heating bottom only º Spacing 40mm Max. temp difference: 350ºC heating bottom only º Spacing 50mm Max. temp difference: 395ºC heating bottom only
Heating amp; Cooling Rate 、Heating: < 8ºC/s ( heating single heater only ) 、Cooling: < 10ºC/s (600 - 100ºC) Max.
Thermal CoupleTwo K-type thermal couples (exposed) are installed on top and bottom heaters separately
Working Voltage208 - 240VAC, single phase, 20A air breaker
Power Requirement2200W total ( 1100W for each heater )
Optional 、One vacuum pump is required. Please order separately by clicking the first picture from the left below. Vacuum level can reach < = 10E-2 torr by mechanical pump 、If you run corrosive gas, please consider to use anti-corrosive dry pump is shown in the second picture from the left below (Pfeiffer pump from Germany) at extra cost 、You may order a recirculating water chiller for saving water source separately 、You may choose digital MFC gas delivery system by clicking the first picture from the right below
WarrantyOne year limited with lifetime support ( Consumable parts such as quartz tube and heating lamps are not covered by the warranty)
Laptop, software amp; WiFi Control (Optional) 、Brand new laptop with Microsoft Window 10 and Microsoft Office 2013 (30 days free trial) for immediate use. 、 Temperature Control System (EQ-MTS01)enables user to edit temperature profile, manage heat-treatment recipe, record and plot data for STR-furnaces. 、A wireless remote control provides up to 300 meters operating range. 、Above features are available upon request at an extra cost (up to $1,000). Please contact us for more information.

•Note: The software is only compatible with Yudian Temperature Controller

ComplianceCE Certified 、UL / MET / CSA Certification is available upon request,additional charges will apply 、Temperature controller is MET and CE Certified
Application notesPlease read article:High efficiency CSS CdTe Solar Cell
Operation Video amp; Instructions
Warning 、The tube furnaces with quartz tube are designed for using under vacuum and low pressure < 0.2 bars / 3 psi / 0.02 Mpa. Vacuum pressures may only be safely used up to 1000°C. The flow rate for gasses should be limited to < 200 SCCM (or 200 mL/min) for reducing thermal shocks to the tube. 、Attention: A two-stage pressure regulator must be installed on the gas cylinder to limit the pressure to below 3 PSI for safe operation.Click here to learnthe installation of a gas regulator.
Reference Articles •Please read article: High-efficiency CSS CdTe Solar Cell •UCLA researchers improve process for manufacturing highly efficient solar cells •Planar Heterojunction Perovskite Solar Cells via Vapor-Assisted Solution Process •Sub 150 ℃Processed Meso-superstructure Perovskite Solar Cells with Enhanced Efficiency •Best_Research-Cell_Efficiencies •Thin-film Sb2Se3 photovoltaics with oriented one-dimensional ribbons and benign grain boundaries
import(/layout/smh/menubottom.html);
生产厂家哪家好?Two Zones CSS Furnace for Rapid Thermal Processing Upto 3" Dia. _650ºC.OTF-1200X-RTP-II-洛阳赛特瑞高温实验炉为专业的生产厂家,具有多年的研发与生产经验、质量稳定可靠 TAG:

洛阳赛特瑞高温实验炉是高温炉_高温马弗炉_实验电炉_高温电炉_真空气氛炉_热震实验炉_箱式电炉_负极材料预碳化箱式气氛炉_石墨化炉_高温电阻炉_升降电炉_工业电炉等设备和高温电炉配件生产厂家

Copyright © 2020 洛阳赛特瑞高温实验炉 豫备