热搜关键词： 可倾斜旋转管式炉立式淬火炉三温区管式炉 Tube

您的位置： 洛阳赛特瑞智能装备有限公司首页 > 高温电炉系列 > Three Zones Sliding Tube Furnace(80m 1200℃Max m OD,) with Flanges for Fast Heating / CoolingOTF-1200X-III-80-SL -

Three Zones Sliding Tube Furnace(80m 1200℃Max m OD,) with Flanges for Fast Heating / CoolingOTF-1200X-III-80-SL

产品型号：Three Zones Sliding Tube Furnace(80m 1200℃Max m OD,) with Flanges for Fast Heating / CoolingOTF-1200X-III-80-SL

电炉类型：高温电炉系列

电炉规格：

加热温度：

电炉系列：赛特瑞电炉

应用范围：。

在线咨询

全国热线

产品简介 / Introduction

Three Zones Sliding Tube Furnace (80m 1200°C Max m OD,) with Flanges for Fast Heating / Cooling - OTF-1200X-III-80-SL

OTF-1200X-III-80-SL is a three zone slide-able tube furnace with 3"IDx79" L quartz tube and flanges and a maximum working temperature up to 1200°C. One pair of sliding rail is installed on bottom of furnace to allow sliding the furnace from one side to another to achieve max. heating and cooling rates up to 100°C/min. For fastest heating,the furnace may bepre-heatedto a desired temperatureand then be slided to the sample's position. As for fastest cooling, the furnace can be slided to another side after sample heatingis completed. Moreover, the heating and cooling rates may reach 15°C/s under vacuum or inert gases. This furnace provides an alternative for rapid thermal processingat the lowest cost.

SPECIFICATIONS

Furnace Structure

、Double layer steel structure with dual air cooling fans. 、One pair of sliding rails are installed on bottom of furnace, which allows furnace to bemanuallymoved from side to side. 、Three heating zones with total 24" length ( 8"L for each zone ) 、Vacuum flanges and adigital vacuum gauge are installed for immediate use. 、Slding rail length is about 1200mm, the furnace can slide 600 mm distance. 、One slide stopping clamp is included for holding the position of the furnace.

Power

7.0KW

Voltage

AC 208-240V Single Phase, 50/60 Hz

Max. Temperature

1200°C

(＜1 hour)

Continuous Temperature

1100°C

Heating Zone Length

、Three zones: 610mm (24") in total 、Z1 - Z2 - Z3：152.4mm (6") + 304.8mm (12") + 152.4mm (6")

Constant Temperature Zone

300 mm (+/-1°C 400-1200°C)

Heating Elements

Fe-Cr-Al Alloy doped by Mo

Processing Tube Size

High purity fused quartz tube

Size: OD: 80xID 75xLength 2000 ( mm)

Two foam ceramic blocks are included which must be placed inside tube to avoid heat radiation damaging O-ring

Temperature Controller

、Three temperature controller with 30 programmable segments for precise controlof heating rate, cooling rate and dwell time. 、Built-in over temperature alarm and protection allows for operation without attendant. 、Three K type thermal couples are included. 、Optional: º The furnace may be operated by PC by installingcontrol module. Please order aMTS-02 control moduleat extra cost. º If you order the PC control module together with the furnace, we will install and test it before shipping. We recommend you to order a computer (laptop) from us to avoid software installation problems.For more information please click here.

Temperature Accuracy

+/ - 1°C

Vacuum Flanges

、Stainless steel vacuum flanges are installed on both ends of tube with heavy duty support. º Leftflange:hinged type flange for easy operation with KF-25 pump connector, digital vacuum gauge and needle valve. º Right flange:one needle valve and 1/4" thermocouple feed-through.An 18" length x1/4" dia. K type thermocouple (included) connected to an Omega temperature calibrator (included) will be inserted through this flange tomonitor the heating and cooling rates ofthe sample's position during furnace sliding. 、Click pictures below to see details:


Right Flange	Left Flange	Temp. Calibrator	24" K type T/C	Digital Vacuum Gauge

Vacuum Level

、Limited by pump ( pump is not included, click on pictures to order ) º 10E-5 torr can be reached by molecular pump º 10E-2 torr by mechanical pump.

Sliding Rails / Table

、Double sliding rail made by Cr plated steel

•Sliding length: 1200 mm

、One slide stopping clamp is included for holding the position of the furnace.

Dimensions

•2500 L, × 510 H ×750W, mm

Net Weight

~ 250 Kg

ShippingDimension

90"x40"x45" (inch)

Shipping Weight

600

lbs

Warranty

One year limited manufacturer's warranty(Consumable parts such as processing tubes, O-rings and heating elements are not covered by the warranty, please order replacements at related products below).

Laptop, software amp; WiFi Control(Optional)

、Brand new laptop with Microsoft Window 10 and Microsoft Office 2013 (30 days free trial) for immediate use. 、 Temperature Control System (EQ-MTS01)enables user to edit temperature profile, manage heat-treatment recipe, record and plot data for STR-furnaces. 、A wireless remote control provides up to 300 meters operating range. 、Above features are available upon request at an extra cost (up to $1,000). Please contact us for more information.
•Note: The software is only compatible with Yudian Temperature Controller

Compliance

、CE Certified 、All electric components ( gt;24V) are UL / MET / CSA certified 、The furnace is ready to pass TUV(UL61010) or CSA certification at extra cost. please click marks below to learn details )

Application NotesClick here to learnthe installation of a gas regulator

、Tube furnaces with quartz tubes are designed for using under vacuum and low pressure ＜ 0.2 bar / 3 psi / 0.02 MPa 、Attention: A two stage pressure regulator must be installed on gas cylinder to limit the pressure to below 3 PSI for safe operation.Click here to learnthe installation of a gas regulator. 、The flow rate for gases should be limited to ＜ 200 SCCM (or 200 ml/min) for reducing thermal shocks to the tube 、Vacuum limit definition for all quartz tube furnaces: * Vacuum pressures may only be safely used up to 1000°C 、Click here to learnHow to set up quartz/ ceramic tube and vacuum flange for STR-Tube furnace.

Warning

、Fast sample cooling can be achieved by sliding the heating chamber away. Please wear protective gears such as heat resistant suit amp; gloves if you intend to do so. DO NOT TOUCH THE TUBE SURFACE WHEN IT IS HOT!

Operation Instructions

import(/layout/smh/menubottom.html);

高温旋转管式炉小型锂电池正极材料烧结炉高温管式炉可倾斜旋转管式炉

生命纪念晶石设备陶瓷脱脂炉高温排胶炉排胶炉

免责声明：本站介绍内容（包括产品图片、产品描述、技术参数等），仅供参考。可能由于更新不及时，或许导致所述内容与实际情况存在一定的差异，请与本公司客服人员联系确认。