OTF-1200X-S-HPCVD is a compact 2" split tube furnace with internal sample traveling system inside the processing tube. This allows the position amp; temperature control of the sample stage or crucible via touch screen digital controller. It is designed for multi-functional rapid thermal processing, such ashybrid physical-chemical deposition(HPCVD),rapid thermal evaporation(RTE), and as well Horizontal Bridgman Crystal Growth( HDC) under various atmosphere for new generation crystal research.SPECIFICATIONS:

Split Tube Furnace	、208 - 240 VAC, 50/60Hz, 1.2 KW max. power consumption 、Working temperature: 1100℃continuous and 1200℃Max. •2" quartz tube (50mm O.Dx44mm I.Dx450mm L) with vacuum sealed flanges. 、Optioanl: you may choose dual zone tube furnace at Pic below right at extra cost to creat higher thermal gradient or longer constant temperature zone -- two zone furnace
Temperature Control	、PID automatic control via solid state relay with 30 steps programmable 、Built in Over Temperature and Thermocouple Failure Protection 、+/-1℃accuracy 、K-type thermal couple 、Heating zone length: 200mm ( 8") 、Constant temperature zone: 60 mm (+/-1℃ 1000 ℃)
Vacuum Sealing	、2" quick clamp flange with 1/4'' fittings, vacuum gauge as well as needle valve on the right side 、The right flange is connected to a stainless steelbellow which is stretchable up to 150 mm. 、Left flange with quick-clamped KF25 vacuum port and 1/4'' barb venting valve 、Max. Vacuum level: 10E-2 torr by mechanical pump and 10-E5 by turbopump (click picture to see details )
Internal Traveling Mechanism amp;PLC Control Pannel	、One1/4" Dia.x24'' long K-type thermal coupleis inserted through the right flange to support a mini-crucible boat in the chamber. (click pic.1 to view) 、A step motor can drive the crucible inside the tube from the heating center to the right end of the furnace, 100 mmmax. 、Touch screen control panel allows travel distance setting and temperature display of crucible position (click pic.2 to view) 、Traveling speed is constant at 180mm/ min. ( variable speed control is available upon request at additional cost ) •A 50x20x20mm mini-crucible boat(~20ml) is installed on a thermal couple (click pic.3 to view). •AIN Sample HolderorGraphite Flat Substrate Holderfor the wafer is available upon request, additional customization fee will apply (click pic.4 to view). Pic.1 Pic.2 Pic.3 Pic.4 Pic.5
Max. Heating amp; Cooling Rate	The max heating and cooling rate can be achieved by moving sample into pre-heated hot zone and move the sample out from hot zone. The typical ramp/cool rate is listed in below: Heating Rate:10°C/sec (150℃- 250°C); 7°C/sec (250℃- 350°C); 4°C/sec (350℃- 500°C); 3°C/sec (500℃- 550°C); 2°C/sec (550℃- 650°C); 1°C/sec (650℃- 800°C); 0.5°C/sec (800℃- 1000°C); Cooling Rate:10°C/sec (950℃- 900°C);7°C/sec (900℃- 850°C);4°C/sec (850℃- 750°C);2°C/sec (750℃- 600°C);1.5°C/sec (600℃- 500°C);1°C/sec (500℃- 400°C);0.5°C/sec (400℃- 300°C);
Optional Parts	、You may need a right angle valve amp; bellows to connect a vacuum pump ( click the 1st amp; 2nd pics to order ) •Anti-Corrosive digital Gaugeup to 10E-5 torr is optional for CVD application (Pic 3) 、You may order multi-channel gas delivery system for DVD or CVD operation ( Pic 4)
Dimensions	( click Pic to see details )
Warranty	One year limited warranty with lifetime support (Consumable parts such as tubes and o-rings are not covered by the warranty)
Laptop, software amp; WiFi Control(Optional)	、Brand new laptop with Microsoft Window 10 and Microsoft Office 2013 (30 days free trial) for immediate use. 、 Temperature Control System (EQ-MTS01)enables user to edit temperature profile, manage heat-treatment recipe, record and plot data for STR-furnaces. 、A wireless remote control provides up to 300 meters operating range. 、Above features are available upon request at an extra cost (up to $1,000). Please contact us for more information. 、Note: The software is only compatible with Yudian Temperature Controller
Compliance	、CE Certified 、All electric components ( gt;24V) are UL / MET / CSA certified 、The furnace is ready to pass TUV(UL61010) or CSA certification at extra cost. （ please click marks below to learn details )
Warning	、Tube furnaces with quartz tubes are designed for using under vacuum and low pressure ＜ 0.2 bars / 3 psi / 0.02 MPa 、Attention: A two-stage pressure regulator must be installed on the gas cylinder to limit the pressure to below 3 PSI for safe operation.Click here to learnthe installation of a gas regulator. 、Vacuum limit definition for all quartz tube furnaces: * Vacuum pressures may only be safely used up to 1000°C
Operation Video and Instructions
Application Notes	This multi-functional furnace is suitable for the applications in below: 、RTE: Crucible loaded withevaporation material is placed in thecenter of the furnace, move sample holder to a downstream position with appropriate temperature where the deposition takes place. 、HPCVD：Similar setup as RTE, we also introduce reactant gas to mix with evaporation vapor and make deposition 、Horizontal Bridgman Crystal Growth：Load material and seed into a crucible and place it in the center of the furnace. Move the crucible at the desired speed to grow single crystal under suitable thermal gradient. 、If you have any question and suggestion, please contact us before purchasing 、After CVD, the graphene must be transferred from the metal catalyst to another substrate for most applications. By using the graphene transfer tape, the residue can be low 、For Horizontaldirectional crystalization (HDC), you may use a gas feedtrough as pic below：

import(/layout/smh/menubottom.html);