赛特瑞• 智能实验装备供应商
集研发设计、销售、售后维保专业服务商
联系电话：
联系电话：
产品型号：1100℃Three Zone Super-Alloy High Pressure Tube Furnace with Gas Flow Control SystemOTF-1200X-HP-III-80-GF
电炉类型：高温电炉系列
电炉规格：
加热温度：
电炉系列：高温马弗炉
应用范围：。
OTF-1200X-HP-III-80-GF is a high-pressure tube furnace with three heating zones and gas flow control system as well as a protective frame. The processing tube is made of Ni-based superalloy with 50 mm ID, which can be heated to max.1100℃under high-pressure of both oxygen and inert gases with controlled flow rate. The furnace originally is designed for processing Fe-based superconductive material, also can be used for exploring new generation oxide ceramic as a compact HIP.
| Furnace | 、Splitable Three heating zone tube furnace with air cooling layer 、High quality fibrous insulation and reflective coating for max. energy saving. 、Power: 208 - 240VAC 50/60Hz , 4KW max. |
| Heating Zone | 、Three heating zones: 150mm + 150mm + 150 mm 、Total heating zone length： 450mm 、Constant temp. zone: 300mm ±5°C |
| Working Temperature | 、1100℃max.for ＜ 1hr 、1000℃for continuous 、Heating rate: ≤10°C/min |
| Temperature Control | 、Three precision digital temperature controller with 30 segments programmable 、PID control method with protection of over-temp. and thermal couple broken 、Temperature stability: ±1°C 、PC control software and laptop computer are included for PC operation |
| Thermocouple | •Omega 3mm OD K Typewith high-temperature (220°C) connector |
| Process Vessel amp;Safety Frame | 、Pressure vessel is made of Nickel based superalloy GH747 (Click to download GH747 nickel based alloy datasheet) 、Vessel size: OD 85xID 50xLength 1000 (mm) 、Pressure vessel is located inside a steel frame to avoid flange flying out by accident ( see picture below ) and ensure a safe operation. 、Optional: torque wrench is available hereto avoid over-tighten the flange bolts. 、Warning: Never put sample inside tube directly without crucible or isolated foil to avoid sample react with tube alloy. |
| Working Pressure vs. Working Temperatue | Pressure calculation based on safety factor 3. 、140 Bar max. at 800°C 、80 Bar max. at 900°C 、40 Bar max. at 1000°C 、2.5 Bar max. at 1100°C 、Never heat up above 1200°C |
| Working Gases | 、Inert gas and oxygen 、No hydrogen or any flammable gas |
| Flange and Fitting | 、Two CF type flanges are weld with female 1/4"NPT fitting to connect high-pressure tube 、2 pcs Copper o-rings are included ( spare copper O-ring is available as consumable ) 、One pair of water cooling ring , made of cupper tube , is installed on two ends of the tube ( gt; 10 liter / min water flow is required) 、One 16L/min flow rate recirculating water chilleris included as a cooling system to save water. |
| Gas Flow System | 、Gas control system is built ina heavy duty mobile tableunder furnace and safety frame •Three pressure sensors and digital displays are installed to monitor furnace pressure for gas inlet, inside tube and gas flow end separately •One high-pressure mass flow controller is built in gas outlet to control gas flow rate with max. 10Mpa working pressure and 500 MCC flow rate laptop via included software for remote monitoring and controlling 、Three adjustable pressure release valves are installed to ensure safety. The valve will release gas when pressure reaches setting point. |
| Dimension amp; Weight | 、Dimension: 1200 Lx600 Dx1540 H,mm （ includes furnace， pressure control table and safety frame 、Net weight: 180 kg |
| Operation Instruction | |
| Compliance and Warranty | •All electric components ( gt;24V) are UL or MET listed, and ready to pass TUV, UL or CSA certificate on feild at extra cost ( click mark to learn what is ) 、One year limited warranty for lifetime support |
| Application Notes | •Hytort Application, or named Hydroretorting of Shale Oilis a process developed by IGT to double the yield of shale oil and hydrocarbon gases. STR-High-Pressure furnaces with Ni-based superalloy tube is an ideal tool for conducting related experiments. Please click underlined to view research paper. |
| Safety Notes | 、Ni-based Superalloy ( Waspaloy or equivalent) is a reliable processing tube which can be used under high temperature and high pressure.. It has excellent ductility and tensile property so only creep deformation happens under overpressure destruction test and following by a crack formed (usually at the hot zone at the center of tube) to release the pressure. Brittle fracture won’t happen in the overpressure destruction test which means no tube explosion will happen under overpressure of inert gas or safe gas or under other accidents causing overpressure of inert gas or safe gas. Thepics show Ni-based Super-alloy processing tube under overpressure test 、Warning： Never put sample inside tube directly without crucible or isolated foil to avoid sample react with tube alloy. 、Attention: For the use with flammable, toxic or corrosive gases, you must contact STR-engineering group for the consultation to know all the prerequisites and precautionary measures. 、Attention: A two-stage pressure regulator must be installed on the gas cylinder to limit the pressure to below 3 PSI for safe operation. Please click here to learn how to install the gas regulator. |
| Optional Assessories | 、To measure the electric properties of thermoelectric ceramics under high pressure amp; temperature conditions, please order alumina testing fixture and high pressure electrical feedthrough (10Mpa Max.) with the furnace (additional fee will apply). |
STANDARD PACKAGE
| P/N | Name | Qty |
| Tube Furnace main machine amp; operation manual | 1 | |
| Processing vessel | 1 | |
| High pressure flange w/ positive pressure sonser | 1 | |
| Vacuum flange KF40 and KF25 connector | ||
| 1.5 meter long, 1/4" high pressure tubes are includedfor connecting to gas tank and gas-inlet furnace tube conflat flange for positive pressure or vacuum | 2 | |
| EQ-KJ5000 | Circulating water chiller | |
| KF-Valve-D40 | KF-40 right-angle valve | 1 |
| KF-Clamp-D40 | KF-40 quick clamp | 2 |
| KF-Clamp-D25 | KF-25 quick clamp | 1 |
| KF-BF25 | KF-25 Blank flange fittings | 1 |
| ORing-Cu82 | Oxygen-free copper gasket | 3 |
| FLG-kit-2 | Furnace hook | 1 |
| PC control software and interfaceand brand name Laptop computer | 1 |
气氛管式电炉 大口径管式电阻炉 超高温加热炉 高温热震实验炉
免责声明：本站介绍内容（包括产品图片、产品描述、技术参数等），仅供参考。可能由于更新不及时，或许导致所述内容与实际情况存在一定的差异，请与本公司客服人员联系确认。 内容专业性较强，仅供参考学习，请勿直接采用。本站部分图片和文字来源于网络收集整理，仅供学习交流，版权归原作者所有，并不代表我站观点。本站将不承担任何法律责任，如果有侵犯到您的权利，请及时联系我们删除。
洛阳赛特瑞高温实验炉始终致力于尖端高温及加热产品综合解决方案。凭借整个集团雄厚的综合实力、优秀的技术、完善的服务体系，成就了洛阳赛特瑞高温实验炉可靠的品质。我们生产的质量好，效率高，节能环保，深受国内外广大客户的欢迎。价格多少钱一台? 需要根据详细技术方案确定
是由供应商洛阳赛特瑞高温实验炉生产的,洛阳赛特瑞高温实验炉可以加热到度
是由生产厂家洛阳赛特瑞高温实验炉生产的,可以联系我们获得电子版操作说明，以及远程视频指导
随着国内企业生产研发以及高校科研的飞速发展，的需求量日益增加。厂家哪个好?销售的公司不少，但购买的时候一定要特别注意，要选择有真正实力，质量可靠，且有专业售后服务团队的真正生产厂家。本生产厂家洛阳赛特瑞高温实验炉以高标准、高要求的研发生产理念，确保设备的可靠性！
外壳由冷轧钢板折,表面经高速抛丸后静电喷塑。
可拆卸组合面有密封垫、环、圈、帽。
推出新型设计方案，结构合理、通用性强、使用寿命高。
可按客户要求定制。
洛阳赛特瑞高温实验炉目前共有90余种实验室设备产品：高温马弗炉、、高温管式炉、气氛炉、真空炉、热震炉、结晶炉、火试金炉、箱式炉，常规品足量半成品储备，快至3个工作日发货，定制品承诺按期交货；可根据客户对产品环境测试的需求，为客户量身定制性价比高的解决方案及非标定制服务。
Phone
微信Wechat
邮箱Emailsaiterui#qq.com 
电话：
邮件：
